Hi,
Today I tried to upgrade our Kaspersky Antivirus on our Exchange Server. After installing the latest Antivirus on the sever, I couldn't access EMC.
I am getting error like "WinRM cannot process the request".
What could be the reason for the problem? we are using Exchange 2010.
Regards,
Ram.
jibmud
Currently I'm having problem with my Exchange 2013, whenever I tried to send an email, it was stored at Drafts and not sent to the recipient. But when I restart the server it's working again, but right now I'm experiencing it again, how to fix this problem?
Thanks in advance.
I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
.
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
Thanks
i have 2 sites running 8 exchange servers 2010. i install 4 servers in one site and assign 2 for CAS and 2 for mailbox .. migration working fine .. user can acess OWA .. only issue i have is in creating new mailbox through EAC .. it stuck with error
for screenshot please visit below link.
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/34217947-97d5-4370-96dd-bd71f852a4ca/#f69133d6-3226-4af8-8999-7c169ba2750b
jibmud
Hello,
I would like to ask if there is any benefit from administration perspective for having lagged database copies on a dedicated server. Server only deployed for lagged copies?
Thanks,
Raman
The exchange 2010 is configured to receive email on second domain configured as email alias. while doing a test using remote connectivity analyzer, getting error:
"The server returned status code 550 - Mailbox unavailable. The server response was:
5.4.1 Relay Access Denied"
On the same mailbox we are able to send receive email using primary domain
The mx record entries are made for both the domain pointing to same ip address as:
mail.global.frontbridge.com
Any help troubleshooting this issue is appreciated
Exchange 2013 CU1 running in a test forest with multiple servers.
I have created the test accounts using the scripts, and I can run Test-ActiveSyncConnectivity with no problems.
However, when run Test-OutlookWebServices i get Microsoft.Exchange.Monitoring.MailboxNotFoundException and asks me to create the test mailbox
I can run get-mailbox with the test mailbox its shows in the error and it returns the mailbox without issues.
Does anyone have any ideas?
I am developing an application service that is using a functional username(username without a mailbox), to send e-mails from a certain mailbox. That's working ok, but now I need to send the e-mail digitally signed.
Is it possible to import the .pfx "server side", so that all e-mails sent by that mailbox are signed without having to code anything extra on my side?
thank you
Hello,
Just installed 2013 excahnge server 3 days ago. We noticed after the first night that we did not receive any external emails throughout the night. I could not find anything wrong with receive connectors. Telnet works internally when this happens but NO access from public side testing with telnet. After I reboot the exchange server everything functions just fine and normal for about 8 hours until it happens again.
I dont know what to check or look for at this point. Very new to exchange 2013. Any kind of advice would be helpful at this time.
It is not a firewall issue. Same firewall and set of rules that we use for other/old mail servers. We only have 1 exchange server that has all roles.
Lead Pusher
My system log has numerous 7031 errors (up to 50 a day) indicating that the Exchange RPC Client Access service terminate unexpectedly. Each time it happens all extenral (for sure) Outlook users lose contact and have to reconnect.
I also see WAS 5009 showing a process service one of the App Pools in IIS terminating unexpectedly. Often it i the MSExchangeRpcProxyAppPool, but they also appear for ny of them.
I don't see any other interesting erros in the system logs or application logs during that time.
Any ideas on how to stabilize the RPC service so clients aren't forced to keep reconnecting?
Eric.
Hello,
I'm getting the following Error when I'm trying to make a Event Task for the spoolsv.exe event in the Event Viewer to send me a email to my email account in the event the Print Spooler stops working and won't reboot itself.
This is the error I get when I press finish of the Basic Task Wizard when I press Finish:
Task Scheduler:
" An error has occurred for task Print Spooler Event. Error message: a task or folder with this name already exists"
However there isn't a task with this name, what does it mean by a folder? - what could be causing this issue? - There isn't
any tasks on this server so fair that would conflict.
We have 3 exchange 2013 servers in a DAG configuration. Each of these servers reports MSExchangeOWAAppPool as unhealthy. But everything works fine with our Outlook Web Access.
Did anyone experience the same situation ?
Thanks,
Antonio
i want to Decommission the entire exchange servers from the organization without down grating the schema ext. please find the exchange server details below.
Primary site
1- tow number of box running client access server with hub transport server that is participating in NLB
2- tow number of box running mailbox server that is participating in DAG
3- two number of box running edge server with clone configuration
DR Site
1- one box runing client access server with hub transport
2- one box runing mailbox server that is participating in existing DAG (Cross site)
3- one box runing edge server
please help on this to acheive the same with the proccessing order.
Thanks & Regards
Sanjay Singh
Hello,
SCENARIO:
I want to run a Performance Baseline of our Exchange server that currently only has 16 GB's of RAM that is running at 800Mhz. I'm replacing the memory in 2 weeks, once it arrives, to 32 GB's at 1333Mhz.
Since the server performs slow at times and runs out of memory which forces a rolling restart to resolve the issue, I'd like to perform a baseline for a full week so I can see if this memory increase will truly increase the performance of the server and if it doesn't I can have a record for future troubleshooting.
QUESTION:
If I run this baseline of the company's Exchange server for a 1 week on a 30 minute snapshot will it affect the servers performance while the baseline is being performed?
Thank you for the feedback.
Hi guys,
Could you please help with this mater, I have dug a lot tasks but still have not been found.
When I try to set MailboxPermission to my mailbox to avoid access from administrator of my domain in Exchange 2013 but it is not effect, the Deny value at the description below is still TRUE, I want it FALSE but no hope.
Second thing is when I set delegation to my mailbox and access to ECP, I can access to another user when navigate to the point at the right corner on the top of the bar in ECP Exchange 2013 page, the little rectangle button near Administrator menu, it drop down a box so I can access to another user mailbox. But when I go to the user mailbox it lead me to the user's ECP page and in this page I can go to the My Mail menu regularly, but that menu is not come up so I cannot get it drop down. I want it appear so I don't know hot to do.
RunspaceId : 90a328d1-8096-402e-80fe-19c46fd0791fThanks you.
We have an mailbox that just collects data from mailbox searches, we would like to purge some of this data from the mailbox, do I have any options via the powershell to accomplish this.
Thanks in advance
How can I see the messages filtered by the Exchange 2013 Content Filter.
If 2010 I cold trawl the SMTP logs. Where do I look now for things that are filtered?
CarolChi
I am a scheduling coordinator and I receive a ton of email invitations from other scheduling coordinators for events that have been scheduled. I have tried to go to resource Scheduler, but all the options are unavailable (grayed out boxes). I can't click anything. What do I need to do to gain access to these buttons?